How to Change Washing Machine Bearings: A Step-by-Step Guide

Your washing machine is one of the most important appliances in your home. It's responsible for keeping your clothes clean and fresh, and it can be a major inconvenience when it breaks down. One of the most common problems that washing machines develop is faulty bearings. Bearings are the components that support the drum of the washing machine, and when they fail, it can cause the drum to wobble and make a loud noise.

If you're experiencing these problems, it's important to change the bearings as soon as possible. Here's a step-by-step guide on how to do it:

1. Gather your tools and materials.

You will need the following tools and materials to change the bearings on your washing machine:

• New bearings
• A socket wrench
• A screwdriver
• A hammer
• A chisel
• A pair of pliers
• A bucket
• A towel

2. Unplug the washing machine and turn off the water supply.

Before you start working on the washing machine, it's important to unplug it and turn off the water supply. This will prevent you from getting injured.

3. Remove the back panel of the washing machine.

The back panel of the washing machine is usually held in place by a few screws. Remove the screws and carefully lift the panel off.

4. Locate the bearings.

The bearings are located on the inside of the drum. They are usually held in place by a few bolts. Remove the bolts and carefully remove the bearings.

5. Install the new bearings.

Place the new bearings on the inside of the drum and secure them with the bolts.

6. Reassemble the washing machine.

Once the new bearings are installed, you can reassemble the washing machine. Replace the back panel and tighten the screws. Plug in the washing machine and turn on the water supply.

7. Test the washing machine.

Run the washing machine through a cycle to make sure that it's working properly. If the washing machine is still making noise, there may be another problem that needs to be addressed.

Here are some additional tips for changing the bearings on your washing machine:

• Make sure that you have the right size bearings for your washing machine. If you're not sure what size bearings you need, consult the washing machine's manual or contact the manufacturer.
• Be careful not to damage the drum of the washing machine when you're removing and installing the bearings.
• If you're not comfortable changing the bearings on your own, you can call a qualified appliance repair technician to do it for you.

How Much Does It Cost to Change Washing Machine Bearings?

The cost of changing washing machine bearings will vary depending on the make and model of your washing machine, as well as the cost of labor in your area. However, you can expect to pay between $150 and $300 for the parts and labor.

How Long Does It Take to Change Washing Machine Bearings?

Changing washing machine bearings is a relatively simple repair, and it can usually be completed in a few hours. However, the time it takes will vary depending on your experience level and the accessibility of the bearings.

Is It Worth It to Change Washing Machine Bearings?

If your washing machine is making a loud noise, it's important to have it checked out by a qualified appliance repair technician. If the bearings are faulty, they will need to be replaced. Changing the bearings is a relatively simple repair, and it can extend the life of your washing machine.

Success Stories

Here are a few success stories from people who have changed their washing machine bearings:

• "My washing machine was making a loud noise, and I was worried that it was going to break down. I called a qualified appliance repair technician, and he told me that the bearings needed to be replaced. I was able to change the bearings myself in a few hours, and my washing machine is now working like new." - Mary J.
• "My washing machine started to wobble, and I knew that the bearings were going bad. I watched a few videos on YouTube, and I was able to change the bearings myself. It took me about an hour, and I saved myself a lot of money." - John S.
• "I'm a landlord, and I have several rental properties. One of my tenants called me and told me that their washing machine was making a loud noise. I went over to the property and changed the bearings myself. It took me about an hour, and I saved my tenant a lot of money." - Tom B.