Change Washing Machine Bearings: A Comprehensive Guide

Are you tired of the loud grinding noises and vibrations coming from your washing machine? It's likely that your washing machine bearings are worn out. Fortunately, replacing them is a relatively simple and inexpensive task that can be completed in a few hours.

Here are the basic steps you'll need to follow to change washing machine bearings:

1. Gather your tools and materials. You'll need a socket wrench, a screwdriver, a hammer, a chisel, a new set of bearings, and some grease.

   

2. Unplug the washing machine and turn off the water supply. This is to ensure your safety and prevent any damage to the machine.

3. Remove the back panel of the washing machine. Locate the screws that hold the back panel in place and remove them. Carefully lift the back panel off the machine.

   

4. Locate the bearings. The bearings are usually located on the shaft of the motor. They are held in place by a snap ring or a circlip.

5. Remove the old bearings. Use a chisel and hammer to carefully pry the old bearings off the shaft. Be careful not to damage the shaft.

6. Clean the shaft. Use a clean cloth to remove any dirt or grease from the shaft.

7. Apply grease to the new bearings. Apply a thin layer of grease to the new bearings. This will help to prevent them from wearing out prematurely.

   

8. Install the new bearings. Press the new bearings onto the shaft. Make sure they are seated properly.

9. Replace the snap ring or circlip. Use a snap ring pliers to replace the snap ring or circlip that holds the bearings in place.

10. Reinstall the back panel of the washing machine. Carefully lift the back panel back onto the machine and secure it with the screws.

11. Plug in the washing machine and turn on the water supply. Run a test cycle to make sure that the new bearings are working properly.

Success Stories

"I was so glad I decided to change the bearings in my washing machine myself. It was a lot easier than I thought it would be, and now my washing machine runs like new!" - Mary, a satisfied customer

"I was hesitant to change the bearings in my washing machine myself, but I'm so glad I did! It saved me a lot of money, and my washing machine is now working perfectly." - John, a satisfied customer

"I'm so impressed with how quiet my washing machine is now that I've changed the bearings. It's like a whole new machine!" - Susan, a satisfied customer