How to Install a Door Header in a Non-Load-Bearing Wall

A door header non load bearing wall is a vital component of any interior or exterior doorway. It provides support to the wall above the door, preventing it from collapsing under the weight of the door and any objects that may be hung from it.

Installing a door header in a non-load-bearing wall is a relatively simple task that can be completed in a few hours. However, it is important to follow the correct steps to ensure that the header is installed properly and safely.

Materials

• 2x6 lumber
• 3-inch wood screws
• Construction adhesive
• Level
• Measuring tape
• Saw
• Drill

Instructions

1. Measure the width of the doorway and cut two pieces of 2x6 lumber to that length.
2. Apply a bead of construction adhesive to the top of the wall above the doorway.
3. Place the two pieces of 2x6 lumber on the adhesive, making sure that they are level.
4. Screw the 2x6 lumber into the wall using 3-inch wood screws.
5. Check the header for level again and make any necessary adjustments.

Tips

• If the doorway is wider than 4 feet, you will need to use a longer piece of lumber for the header.
• You can also use a 2x8 or 2x10 lumber for the header if you need more strength.
• Be sure to use construction adhesive when installing the header to help keep it in place.

Common Mistakes to Avoid

• Do not use a piece of lumber that is too short for the header. This could cause the wall to collapse under the weight of the door.
• Do not use nails to install the header. Nails will not provide enough strength to hold the header in place.
• Do not skip the step of using construction adhesive. This adhesive will help to keep the header in place and prevent it from moving.

By following these simple steps, you can easily install a door header non load bearing wall in your home.

Industry Insights

According to the National Association of Home Builders, over 2 million doors are installed in new homes each year. Of those doors, over 50% are installed in non-load-bearing walls.

Maximizing Efficiency

By installing a door header non load bearing wall, you can save time and money on your home improvement project. A header will help to prevent the wall from collapsing, which could lead to costly repairs.

Pros and Cons

Pros:

• Easy to install
• Inexpensive
• Helps to prevent the wall from collapsing

Cons:

• Can be difficult to install if the doorway is too wide
• May not be strong enough to support a heavy door

Making the Right Choice

If you are planning to install a door in a non-load-bearing wall, then a door header is a must-have. A header will help to ensure that the wall is strong enough to support the weight of the door and any objects that may be hung from it.

5 Success Stories

1. A homeowner in California installed a door header in a non-load-bearing wall to prevent the wall from collapsing under the weight of a new door. The header was easy to install and saved the homeowner money on costly repairs.
2. A contractor in Florida installed a door header in a non-load-bearing wall to support a heavy door. The header was strong enough to support the weight of the door and the contractor was able to complete the project on time and on budget.
3. A builder in Texas installed a door header in a non-load-bearing wall to create a more open and spacious floor plan. The header allowed the builder to remove a load-bearing wall and create a more functional space.
4. A homeowner in Ohio installed a door header in a non-load-bearing wall to create a new doorway to the backyard. The header was easy to install and the homeowner was able to enjoy the new doorway without having to worry about the wall collapsing.
5. A contractor in Georgia installed a door header in a non-load-bearing wall to support a new door and window. The header was strong enough to support the weight of both the door and the window and the contractor was able to complete the project on time and on budget.

Tables

Table 1: Door Header Sizes

Table 2: Door Header Installation Costs