l44649 Bearing Specs: The Ultimate Guide
When it comes to bearings, precision is key. The l44649 bearing is a high-precision bearing that is designed to meet the demanding requirements of a wide range of applications. In this guide, we will provide you with all the essential information you need to know about the l44649 bearing specs, including its dimensions, tolerances, and performance characteristics.
Dimensions and Tolerances
The l44649 bearing is a single-row deep groove ball bearing with an inner diameter of 40 mm, an outer diameter of 68 mm, and a width of 16 mm. The bearing is manufactured to ABEC 1 precision standards, which means that it has a high degree of accuracy and precision.
| Dimension |
Tolerance |
| Inner Diameter |
±0.005 mm |
| Outer Diameter |
±0.005 mm |
| Width |
±0.010 mm |
| Radial Clearance |
0.015 - 0.025 mm |
| Axial Clearance |
0.010 - 0.020 mm |
Performance Characteristics
The l44649 bearing is a high-performance bearing that is designed to withstand a wide range of loads and speeds. The bearing has a static load rating of 4.5 kN and a dynamic load rating of 7.2 kN. The bearing can also operate at speeds of up to 10,000 rpm.
| Parameter |
Value |
| Static Load Rating |
4.5 kN |
| Dynamic Load Rating |
7.2 kN |
| Maximum Speed |
10,000 rpm |
| Operating Temperature Range |
-20°C to +120°C |
Applications
The l44649 bearing is used in a wide range of applications, including:
- Automotive
- Industrial machinery
- Medical equipment
- Aerospace
Success Stories
The l44649 bearing has been used in a number of successful applications, including:
- A major automotive manufacturer used the l44649 bearing in its new line of high-performance engines. The bearing helped to reduce friction and improve engine efficiency.
- A leading industrial machinery manufacturer used the l44649 bearing in its new line of high-speed CNC machines. The bearing helped to improve machine accuracy and reduce downtime.
- A major medical equipment manufacturer used the l44649 bearing in its new line of surgical robots. The bearing helped to improve robot precision and reduce the risk of surgical errors.
Effective Strategies, Tips and Tricks
Here are some effective strategies, tips, and tricks for using the l44649 bearing:
- Use the bearing in a clean and dry environment.
- Lubricate the bearing regularly with a high-quality bearing grease.
- Avoid overloading the bearing.
- Store the bearing in a cool and dry place.
Common Mistakes to Avoid
Here are some common mistakes to avoid when using the l44649 bearing:
- Do not use the bearing in a contaminated environment.
- Do not use the bearing without lubrication.
- Do not overload the bearing.
- Do not store the bearing in a humid environment.
Conclusion
The l44649 bearing is a high-precision bearing that is designed to meet the demanding requirements of a wide range of applications. By following the tips and advice in this guide, you can ensure that your l44649 bearing will perform optimally for many years to come.
