The 6004RS bearing is a versatile and widely used bearing in various industrial applications. This single-row deep groove ball bearing features radial play, making it suitable for accommodating misalignment and shaft deflections. Its shielded design provides protection from contamination, offering enhanced durability and reliability. With its exceptional performance, the 6004RS bearing has become the cornerstone of countless industries, from automotive to aerospace.
The 6004RS bearing finds application in a vast array of industries due to its versatility and reliability. Some notable applications include:
The 6004RS bearing conforms to DIN 625-1 and ISO 15:2014 standards. Its dimensions are as follows:
Parameter | Value |
---|---|
Bore Diameter | 20 mm |
Outer Diameter | 47 mm |
Width | 14 mm |
The 6004RS bearing has a high load-carrying capacity and can withstand both radial and axial loads. The bearing's load ratings and speed limits vary depending on the operating conditions and application. For specific load ratings and speed limits, refer to the bearing manufacturer's catalog or consult with an engineering professional.
Proper mounting and maintenance are crucial for maximizing the life and performance of the 6004RS bearing. To ensure optimal performance, consider the following guidelines:
Q: What is the difference between a 6004RS bearing and a 6004-2RS bearing?
A: The 6004-2RS bearing has additional seals on both sides, providing enhanced protection against contamination.
Q: Can the 6004RS bearing be used in high-temperature applications?
A: Yes, but the bearing's performance and life expectancy may be affected. Consult with an engineering professional for guidance on high-temperature applications.
Q: How often should I replace the 6004RS bearing?
A: The replacement schedule varies depending on the operating conditions and application. Regular inspections and maintenance are crucial for determining the optimal replacement interval.
Story 1:
A maintenance technician was struggling with frequent bearing failures in an industrial gearbox. After thorough investigation, he discovered that the bearings were not properly lubricated. By implementing a regular lubrication schedule, he significantly extended the bearing life and reduced downtime.
Lesson: Regular lubrication is essential for bearing longevity and performance.
Story 2:
An engineer was designing a new electric motor and selected a 6004RS bearing based on its specifications. However, during field testing, the motor experienced premature bearing failures. Upon further analysis, it was determined that the bearings were overloaded due to incorrect shaft alignment.
Lesson: Proper application and consideration of operating conditions are crucial for bearing performance.
Story 3:
A production line was experiencing excessive noise from an assembly involving 6004RS bearings. After troubleshooting, it was discovered that the bearings were mounted using a hammer, resulting in misalignment and vibration. By using a proper press for bearing installation, the noise was eliminated.
Lesson: Incorrect mounting techniques can compromise bearing performance and cause noise.
Load Type | Static Load Rating (kN) | Dynamic Load Rating (kN) |
---|---|---|
Radial | 9.8 | 14 |
Axial | 5.2 | 7.5 |
Lubrication Type | Grease | Oil |
---|---|---|
Limiting Speed (rpm) | 10,000 | 15,000 |
Lubricant Type | Temperature Range (°C) |
---|---|
Lithium-based grease | -30 to 120 |
Mineral oil | -20 to 100 |
Synthetic oil | -40 to 150 |
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-13 08:10:18 UTC
2024-08-01 02:37:48 UTC
2024-08-05 03:39:51 UTC
2024-08-23 11:53:57 UTC
2024-08-23 11:54:10 UTC
2024-08-23 11:54:30 UTC
2024-08-23 11:54:47 UTC
2024-08-27 00:33:30 UTC
2024-10-17 01:33:03 UTC
2024-10-17 01:33:03 UTC
2024-10-17 01:33:03 UTC
2024-10-17 01:33:03 UTC
2024-10-17 01:33:02 UTC
2024-10-17 01:33:02 UTC
2024-10-17 01:33:02 UTC
2024-10-17 01:33:02 UTC