2016 Dodge Charger Drive Shaft Center Bearing Replacement: A Comprehensive Guide

Replacing the drive shaft center bearing in a 2016 Dodge Charger is a task that requires a certain level of mechanical expertise. However, with the right tools and knowledge, it is a job that can be completed in a few hours. This guide will provide you with step-by-step instructions on how to replace the drive shaft center bearing on your 2016 Dodge Charger.

Why the Drive Shaft Center Bearing Matters

The drive shaft center bearing is a critical component of the drivetrain in your 2016 Dodge Charger. It supports the driveshaft and reduces vibrations caused by the rotation of the driveshaft. A faulty drive shaft center bearing can lead to a number of problems, including:

• Vibrations: A faulty drive shaft center bearing can cause the driveshaft to vibrate excessively, which can be felt throughout the vehicle.
• Noise: A faulty drive shaft center bearing can also cause a whining or growling noise when the vehicle is in motion.
• Damage to other components: A faulty drive shaft center bearing can damage other components in the drivetrain, such as the driveshaft itself or the transmission.

Benefits of Replacing the Drive Shaft Center Bearing

Replacing a faulty drive shaft center bearing offers several benefits, including:

• Reduced vibrations: Replacing a faulty drive shaft center bearing can reduce vibrations and improve the overall ride quality of your 2016 Dodge Charger.
• Quieter operation: Replacing a faulty drive shaft center bearing can also reduce noise and make your vehicle more enjoyable to drive.
• Improved performance: Replacing a faulty drive shaft center bearing can improve the performance of your 2016 Dodge Charger by reducing drag and improving efficiency.

Tools and Materials Required

Before you begin replacing the drive shaft center bearing on your 2016 Dodge Charger, you will need to gather the following tools and materials:

• Tools:
  • Socket wrench set
  • Ratchet
  • Jack stands
  • Floor jack
  • Pry bar
  • Hammer
• Materials:
  • New drive shaft center bearing
  • Grease

Step-by-Step Instructions

1. Prepare the vehicle: Park your 2016 Dodge Charger on a level surface and engage the parking brake. Allow the vehicle to cool down if it has been recently driven.
2. Raise the vehicle: Use a floor jack to raise the front end of the vehicle. Place jack stands under the frame for support.
3. Disconnect the driveshaft: Use a socket wrench to disconnect the driveshaft from the transmission and the differential.
4. Remove the old drive shaft center bearing: Use a pry bar to remove the old drive shaft center bearing from the driveshaft.
5. Install the new drive shaft center bearing: Apply a thin layer of grease to the new drive shaft center bearing and install it on the driveshaft.
6. Reattach the driveshaft: Use a socket wrench to reattach the driveshaft to the transmission and the differential.
7. Lower the vehicle: Use a floor jack to lower the vehicle. Remove the jack stands.

Common Mistakes to Avoid

When replacing the drive shaft center bearing on your 2016 Dodge Charger, it is important to avoid the following common mistakes:

• Using the wrong size bearing: Be sure to use the correct size bearing for your specific 2016 Dodge Charger model. Using the wrong size bearing can lead to premature failure.
• Not greasing the bearing: Always apply a thin layer of grease to the new bearing before installing it. This will help to reduce friction and extend the life of the bearing.
• Overtightening the bolts: Do not overtighten the bolts that hold the bearing in place. Overtightening can damage the bearing or the driveshaft.

FAQs

Q: How often should I replace the drive shaft center bearing?
A: The drive shaft center bearing should be replaced every 60,000 to 80,000 miles.

Q: Can I replace the drive shaft center bearing myself?
A: Yes, it is possible to replace the drive shaft center bearing yourself with the right tools and knowledge. However, it is important to note that this is not a simple task and may require the assistance of a qualified mechanic.

Q: How much does it cost to replace the drive shaft center bearing?
A: The cost of replacing the drive shaft center bearing can vary depending on the make and model of your vehicle, as well as the location of the repair. However, you can expect to pay between $200 and $400 for the parts and labor.

Call to Action

If you are experiencing any of the symptoms of a faulty drive shaft center bearing, do not ignore them. Replacing a faulty drive shaft center bearing is a relatively inexpensive repair that can save you from more costly repairs in the future. Contact a qualified mechanic today to schedule an appointment for drive shaft center bearing replacement.