The L44649 bearing size is a widely used designation in the realm of mechanical engineering, denoting a specific type of ball bearing with precise dimensions and load-bearing capabilities. Understanding the significance of this bearing size is crucial for selecting the appropriate components for various industrial applications.
The L44649 bearing size adheres to a standardized naming convention that provides detailed information about its dimensions and design. Breaking down the designation yields the following characteristics:
Additionally, these bearings typically have an outside diameter of 35 mm and a width of 11 mm. The L44649 bearing size is a relatively small type of bearing, making it ideal for applications where space is limited.
The L44649 bearing size finds its application in a wide range of industries, including:
These bearings are designed to withstand moderate loads and speeds, making them suitable for applications that require reliable and efficient operation.
Incorporating L44649 bearings into your designs offers several advantages:
The appropriate selection of bearing size is crucial for optimizing equipment performance. Undersized bearings may lead to premature failure, while oversized bearings contribute to increased friction and reduced efficiency. Therefore, understanding the L44649 bearing size and its implications is essential for achieving optimal performance and extending equipment life.
The L44649 bearing size conforms to various industry standards, including:
Adherence to these standards ensures compatibility and interchangeability with other bearings of the same size.
To ensure the optimal performance of your equipment, consider the following strategies when selecting L44649 bearings:
To prevent costly maintenance and downtime, avoid the following common mistakes:
The L44649 bearing size plays a crucial role in determining the functionality and longevity of your equipment. By understanding the significance of this size, engineers and technicians can make informed decisions when selecting bearings for their designs.
Incorporating L44649 bearings into your designs offers several advantages:
A: Determine the specific load and speed requirements of your application and consult with a bearing manufacturer or distributor for guidance.
A: The maximum load capacity varies depending on the specific type and design of the bearing. Refer to the manufacturer's specifications for detailed information.
A: Use a high-quality bearing grease and follow the manufacturer's recommended lubrication intervals and procedures.
A: Excessive noise, vibration, heat, and reduced rotational smoothness can indicate bearing failure.
A: Proper lubrication, regular maintenance, and avoiding overloading contribute to extending bearing life.
A: Technical specifications, application notes, and product catalogs are available from bearing manufacturers and distributors.
A maintenance technician was tasked with replacing a failed bearing in a critical piece of machinery. After meticulously following the manufacturer's instructions, the technician realized that the bearing was still not functioning properly. Upon closer inspection, it was discovered that the bearing size was slightly off, leading to misalignment and premature failure. The technician's oversight cost the company several hours of downtime and a hefty replacement bill.
A design engineer was working on a new product that required a small, high-speed bearing. The engineer initially specified a bearing size that was too large for the application, resulting in excessive friction and reduced efficiency. After consulting with a bearing manufacturer, the engineer selected the L44649 bearing size, which was a perfect fit for the design. The product was a success, thanks to the engineer's understanding of bearing size and its impact on performance.
A maintenance crew was struggling to diagnose a persistent vibration in a large machine. After several hours of troubleshooting, they discovered that one of the L44649 bearings was damaged and out of alignment. Replacing the bearing and ensuring proper alignment eliminated the vibration, restoring the machine to optimal operation. This incident highlighted the importance of regular maintenance and the consequences of ignoring bearing issues.
The L44649 bearing size is a critical consideration in mechanical design. Understanding the significance of this size and its impact on equipment performance, reliability, and durability is essential for engineers, technicians, and decision-makers. By considering the factors discussed in this comprehensive guide, you can make informed choices and optimize the performance of your equipment.
For further assistance in selecting and applying L44649 bearings, reach out to reputable bearing manufacturers or distributors. Their expertise and technical support can help you ensure the success of your projects and maximize the return on your investment.
Feature | Value |
---|---|
Bore Diameter (D) | 9 mm |
Outside Diameter (d) | 35 mm |
Width (B) | 11 mm |
Flange Diameter (df) | 47 mm |
Number of Bolts | 4 |
Bolt Hole Diameter (d1) | 6.5 mm |
Bolt Circle Diameter (D1) | 34 mm |
Load Type | Static (C0) | Dynamic (C) |
---|---|---|
Radial | 7.2 kN | 10.8 kN |
Axial | 4.5 kN | 6.75 kN |
Speed Type | Limit |
---|---|
Limiting Speed | 6,500 rpm |
Reference Speed | 1,900 rpm |
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-13 08:10:18 UTC
2024-08-01 02:37:48 UTC
2024-08-05 03:39:51 UTC
2024-09-21 23:29:06 UTC
2024-09-26 10:15:07 UTC
2024-10-09 04:31:55 UTC
2024-09-28 22:32:12 UTC
2024-08-02 06:58:43 UTC
2024-08-02 06:58:55 UTC
2024-08-02 06:59:05 UTC
2024-10-19 01:33:05 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:01 UTC
2024-10-19 01:33:00 UTC
2024-10-19 01:32:58 UTC
2024-10-19 01:32:58 UTC