L44649 Bearing Size: A Comprehensive Guide

Position：home

L44649 Bearing Size: A Comprehensive Guide

The L44649 is a deep groove ball bearing with the following dimensions:

Inner diameter: 40 mm
Outer diameter: 80 mm
Width: 18 mm

Equivalents and Interchangeability

The L44649 is equivalent to the following bearings:

Bearing Number	Manufacturer
6206	SKF
R-16206	NTN
UC206	Timken

Note: These bearings are interchangeable in most applications. However, it is important to consult with the bearing manufacturer to ensure compatibility before making any substitutions.

Applications

The L44649 bearing is commonly used in a variety of applications, including:

l44649 bearing size

Automotive transmissions
Industrial machinery
Pumps
Fans
Blowers

Specifications

The L44649 bearing has the following specifications:

Specification	Value
Load rating (static)	58.3 kN
Load rating (dynamic)	130 kN
Speed limit	13,000 rpm
Operating temperature range	-20°C to +120°C

Selection and Installation

When selecting a L44649 bearing, it is important to consider the following factors:

Load requirements
Speed requirements
Operating temperature
Environmental conditions

The bearing should be installed properly to ensure optimal performance. The following steps should be followed:

Clean the bearing and the bearing housing.
Apply a thin layer of lubricant to the bearing.
Insert the bearing into the housing.
Secure the bearing with a retaining ring or other suitable means.

Maintenance

The L44649 bearing requires minimal maintenance. However, it is important to inspect the bearing regularly for signs of wear or damage. The bearing should be lubricated periodically to prevent premature failure.

L44649 Bearing Size: A Comprehensive Guide

Benefits of Using the L44649 Bearing

The L44649 bearing offers several benefits, including:

High load capacity
Durability
Reliability
Versatility

Stories

Story 1:

A group of engineers were working on designing a new transmission for a heavy-duty truck. They needed a bearing that could withstand the high loads and speeds associated with the application. After extensive research, they decided to use the L44649 bearing. The bearing performed flawlessly and the transmission was a success.

Lesson learned: The right bearing can make all the difference in a critical application.

L44649 Bearing Size: A Comprehensive Guide

Story 2:

A maintenance technician was inspecting a pump at a manufacturing plant. He noticed that the L44649 bearing was making a strange noise. He removed the bearing and found that it was damaged. The bearing had been installed improperly and had been running dry. The technician replaced the bearing with a new one and the pump was back up and running in no time.

Lesson learned: Proper installation and maintenance are essential for long-term bearing performance.

Story 3:

A student was working on a project for his engineering class. He needed a bearing that would fit into a tight space. He looked at several different bearings but couldn't find one that was the right size. Finally, he found the L44649 bearing and realized that it was perfect for his application. The bearing fit perfectly and the student was able to complete his project on time.

Lesson learned: Even the smallest of projects can benefit from the right bearing.

Tables

Table 1: L44649 Bearing Dimensions	Table 2: L44649 Bearing Specifications	Table 3: L44649 Bearing Equivalents
Inner diameter: 40 mm	Load rating (static): 58.3 kN	6206 (SKF)
Outer diameter: 80 mm	Load rating (dynamic): 130 kN	R-16206 (NTN)
Width: 18 mm	Speed limit: 13,000 rpm	UC206 (Timken)
	Operating temperature range: -20°C to +120°C

Effective Strategies

Use the right bearing for the application.
Install the bearing properly.
Lubricate the bearing regularly.
Inspect the bearing regularly for signs of wear or damage.

Tips and Tricks

When installing a bearing, use a press or other suitable tool to avoid damaging the bearing.
If the bearing is difficult to remove, use a bearing puller.
Store bearings in a cool, dry place.

How to Approach Step-by-Step

Determine the load requirements, speed requirements, and operating temperature of the application.
Select the appropriate bearing size and type.
Purchase the bearing from a reputable supplier.
Install the bearing properly.
Lubricate the bearing regularly.
Inspect the bearing regularly for signs of wear or damage.

Why It Matters

The right bearing can make all the difference in the performance of a machine. By using the right bearing and maintaining it properly, you can extend the life of your equipment and reduce downtime.